1、因为墙面不可能达到理想状态的垂直和平整，所以粘贴保温板（例如EPS板）必须粘贴时第一遍打磨以保证墙面平整度，然后等苯板粘贴牢固后挂网之前进行第二遍打磨找平。
1. Because the wall can not achieve the desired vertical and flat state, so pasting insulation board (e.g. EPS board) must be first polished to ensure the wall smoothness, and then the second polishing leveling before the benzene board is firmly pasted after hanging the net.
2、保温板缝隙必须用半条塞满，板条不得粘结，更不得用胶粘剂填缝。
2. The gap of the insulation board must be filled with half strip. The strip must not be bonded, let alone filled with adhesive.
3、外墙阴阳角和墙面不要求垂直，但是一定要顺直，不能有明显的折角。
3. The Yin-Yang angle and the wall surface of the external wall do not need to be vertical, but they must be straight and have no obvious bending angle.
4、门窗洞口角部的聚苯板，应采用整块聚苯板裁出洞口，不得拼接
4. Polyphenyl boards at the corner of doors and windows should be cut out by whole polyphenyl boards and not spliced together.
5、聚苯板施工完毕后，至少需要静置24h才能进行打磨，以防止聚苯板移动，减弱板材与基层墙体的粘结强度。
5. After the construction of the polyphenyl board, it needs to be stationary for at least 24 hours before grinding, in order to prevent the movement of the polyphenyl board and weaken the bonding strength between the board and the basement wall.
6、执行谁施工谁负责的安全、质量、进度等管理制度。
6. Execute the safety, quality and progress management system of who is responsible for the construction.
7、门窗洞口网格布加强图
7. Strengthened Mesh Layout of Doors and Windows
8、窗口处顶板做滴水线、底板做坡水，窗框底部排水孔不得堵塞并且保证向外排水。
8. The roof of the window is used as dripping line and the bottom is used as slope water. The drainage holes at the bottom of the window frame should not be blocked and guaranteed to drain outwards.